Electroplated Diamond Tools are Frequently used in following Industries
Typical Electroplated Diamond Tool Applications / Materials Used On:
Fiberglass | Polyesters | Melamine | Carbon |
Graphite | Asbestos | Ceramics | Pure Glass |
Refractory | Micarta | Refrasil | Astralite |
Green Carbide | Carbide | Ferrites | Quartz |
Silicon | Stonebbb | Marble | Porcelain |
Alumina | Glass Bonded Mica | Silicone | Onyx |
Beryllium Oxide | Barium Titanate | Transmission Bands | Clutch Linings |
Brake Linings | Epoxy | Taped Graphite | Glass Laminated |
Cerments | Optical Materials | Composites | AND MANY OTHERS |
Material | Workheight(Inches) | RecommendedBand | EdgeConfiguration | Band Speed(SFPM) | KerfLoss | Coolant |
Quartz/Glass | 1-6 6-10 10-18 18-30 30+ | 1″ x .020″ 1″ x .025″ 1″ x .035″ 1¼” x .040″ 1½” x .040″ | Continuous or Segmented | 2000-2500 2000-2500 2000-2500 2000-2500 2000-2500 | 0.040″ 0.055″ 0.072″ 0.075″ 0.075″ | Yes Yes Yes Yes Yes |
Silicon (Electronic) | 1-6 6-10 10+ | 1″ x .020″ 1″ x .025″ 1″ x .035″ | Continuous | 1800-2200 1800-2200 1800-2200 | 0.040″ 0.055″ 0.072″ | Yes Yes Yes |
Silicon (Solar) | 1-6 6-10 10-12 12+ | 1″ x .020″ 1″ x .025″ 1″ x .035″ 1¼” x .040″ | Continuous | 1800-2200 1800-2200 1800-2200 1800-2200 | 0.040″ 0.055″ 0.072″ 0.075″ | Yes Yes Yes Yes |
Ceramic | 1-6 6-10 10+ | 1″ x .020″ 1″ x .025″ 1″ x .035″ | Continuous | 1800-2200 1800-2200 1800-2200 | 0.040″ 0.055″ 0.072″ | No No No |
Carbide | 1-4 4-6 | 3/4″ x .020″ 1″ x .020″ | Continuous | 1800-2200 1800-2200 | 0.035″ 0.040″ | No No |
Granite | 1-4 4-8 8-12 12+ | 1″ x .025″ 1″ x .035″ 1¼” x .040″ 1½” x .040″ | Continuous or Segmented | 1800-2200 1800-2200 1800-2200 1800-2200 | 0.055″ 0.072″ 0.075″ 0.075″ | Yes Yes Yes Yes |
Marble | 1-4 4-8 8-12 12-18 18+ | 1″ x .020″ 1″ x .025″ 1″ x .035″ 1¼” x .040″ 1½” x .040″ | Continuous or Segmented | 2000-2500 2000-2500 2000-2500 2000-2500 2000-2500 | 0.040″ 0.055″ 0.072″ 0.075″ 0.075″ | Yes Yes Yes Yes Yes |
Pyrex | 1-4 4-8 8+ | 1″ x .020″ 1″ x .025″ 1″ x .035″ | Continuous | 1800-2200 1800-2200 1800-2200 | 0.040″ 0.055″ 0.072″ | Yes Yes Yes |
Masonry Materials | 1-4 4-8 8+ | 1″ x .020″ 1″ x .025″ 1″ x .035″ | Continuous or Segmented | 1800-2200 1800-2200 1800-2200 | 0.040″ 0.055″ 0.072″ | Yes Yes Yes |
Carbon/Graphite | 1-6 6-18 18-24 24-32 32-40 40+ | 1″ x .020″ 1″ x .025″ 1″ x .035″ 1¼” x .040″ 1½” x .040″ 2″ x .040″ | Segmented or Gulleted | 2000-2500 2000-2500 2000-2500 2000-2500 2000-2500 2000-2500 | 0.040″ 0.055″ 0.072″ 0.075″ 0.075″ 0.080″ | No No No No No |
Fiberglass FRP | ANY | 1″ x .020″ | Gulleted | 2000-2500 | 0.040″ | No |
Glass Reinforced Plastic (GRP) | 1-6 6-10 10+ | 1″ x .020″ 1″ x .025″ 1″ x .035″ | Segmented or Gulleted | 2000-2500 2000-2500 2000-2500 | 0.040″ 0.055″ 0.072″ | No No No |
Fiberglass Laminate | ANY | 1″ x .020″ | Gulleted | 2000-2500 | 0.040″ | No |
Transite | ANY | 1″ x .020″ | Segmented | 2000-2500 | 0.040″ | No |
Wire Reinforced Rubber | ANY | 1″ x .035″ | Continuous | 2000-2500 | 0.072″ | No |
Asbestos/ Cement Pipe | 1-6 DIA 6-12 DIA 12+ DIA | 1″ x .020″ 1″ x .025″ 1″ x .035″ | Segmented | 2000-2500 2000-2500 2000-2500 | 0.040″ 0.055″ 0.072″ | No No No |
Friction Products | ANY | 1″ x .035″ | Segmented | 2000-2500 | 0.072″ | No |
Diamond Grit Chart
Typical Electroplated Diamond Tool Applications / Materials Used On
Alumin
Asbestos
Barium Titanate
Beryllium Oxide
Brake Linings
Carbide
Carbon
Ceramics
Optical Materials
Cerments
Composites
Epoxy
Clutch Linings
Melamine
fiberclass
Ferrites
Glass Bonded Mica
Graphite
Green Carbide
silicon
Marble
Taped Graphite
Micarta
Onyx
Transmission Bands
Quartz
Refractory
palister
AND MANY OTHERS